Update from AS - 26/09/18

Forum G.07A - we just need a projector to be mounted on an existing movable podium to project on the east wall of G.07A. We expect usage to be low, so I'm inclined to keep things simple - no BYOD, no PC, no audio. LSTS involvement might be as simple as suggesting which projector to procure?

Forum 2.33 - this has recently reverted to being a meeting room. We have a podium with AMX panel and control. I can't recall whether the original projector was ceiling or table mounted. In any case, I guess we'd be better with a TFT panel now. I was envisioning replicating the setup in AT-7.02/7.03, but without the audio (mics etc). This would definitely need to be a contractor job.

AT-5.01 - we'd like to install the same as was installed in AT-6.16 - namely TFT/BYOD/PC/control, all wall-mounted. Again, I think this would need to be a contractor job.

We have budget for all the above.

As for the PC wall brackets that I reckoned hadn't been installed - the rooms are AT-6.16, 8.02 and 9.01. Certainly neither 8.02 nor 9.01 have PC wall brackets.

As for the remaining Forum AV, I'll get back to you once we've had some internal deliberations.

----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

1) Add AV to AT-5.01. Same as was installed for AT-6.16 - LCD 65", BYOD, MLC Plus 100, PC wall bracket

2) Projector for IF-G.07A - just a projector on a trolley (we already have a suitable trolley) which can be wheeled in to project on the east wall of G.07A. No PC nor BYOD.

3) Replace AV in IF-4.02 - ideally want to replicate what we installed in IF-5.02, namely two screens, a BiAmp DevIO and a VC camera. But, this time with BYOD and PC and appropriate control.